Special Inspections

GPR
Ground Penetrating Radar (GPR)
Non-destructive Testing Magnetic Particle
Non-Destructive Testing Magnetic Particles
Soil – Site preparation
Post Installed Anchor Pull Test
Boroscope
Boroscope
previous arrow
next arrow
GPR
Non-destructive Testing Magnetic Particle
Soil – Site preparation
Boroscope
previous arrow
next arrow

Special inspection are inspections with various tests necessary to determine materials compliance, fabrication, erection, or placement of components and connections critical to the structural integrity of the building, are performed in accordance with approved drawings and specifications. Quality Control Laboratories, LLC. (QCL) will conduct inspection and testing during construction to verify that work was performed in accordance with approved plans and specifications. Special inspections must be performed by special inspectors on behalf of a registered special inspection agency.

Quality Control Laboratories, LLC. have all the required certificates, experience and education as required in Appendix A of the Special Inspection Rule. These inspections and testing are performed by QCL qualified individuals in accordance with NYCDOB SIA requirements.

Quality Control laboratories, LLC. (QCL) is an IAS Certified Special Inspection Agency that caters on Structural, Civil, Architectural and Mechanical Special Inspections. QCL inspectors perform all structural inspections listed on the TR1, TR4, TR5, TR7 & TR8. QCL also is a licensed and accredited concrete Testing Laboratory that is fully capable of providing all necessary tests to certify required TR2 for your project.


TESTING SERVICES OFFERED

  • Coating Thickness
  • F-Number, Floor Flatness & Levelness
  • Pile Load Testing Monitoring
  • Magnetic Particle Testing
  • Dynamic Cone Penetrometer Testing
  • Ultrasonic Testing
  • In-Place Nuclear Density Tests (Soil Compaction)
  • Non-Destructive Testing

QUALITY CONTROL LABORATORY
Date Registered:   06/28/2012 License #:  000406
Status:  A - ACTIVE
Office Address:  100 Shames Dr Westbury, NY 11590
Business Phone:  718-545-6064
Agency Information
Agency Name: QUALITY CONTROL LABORATORY
Owner Name: CIMAFRANCA, EDGAR
Owner Phone: 718-545-6064
Agency Address: 100 Shames Dr Westbury, NY 11590
E-Mail:
 
Director Information
Name: SAMUEL BAUTISTA
Title: DIRECTOR-LAB
License Type: PROFESSIONAL ENGINEER License No: 089947
 
Technical Director Information
Name: EDWIN DEGUZMAN
Title: DIRECTOR MECHANICAL
License Type: PROFESSIONAL ENGINEER License No: 086583
Special Inspections
Class Number Special Inspections Code/Section
01 – CLASS 1 RC1000 FLOOD ZONE COMPLIANCE BC 1704.29, BC G105
01 – CLASS 1 RC1002 LUMINOUS EGRESS PATH MARKINGS BC 1704.30, BC 1024.8
01 – CLASS 1 RC1003 EMERGENCY & STANDBY POWER SYSTEMS (GENERATORS) BC 1704.13 / BC 2702
01 – CLASS 1 RC1004 STRUCTURAL STEEL – WELDING BC 1704.3.1
01 – CLASS 1 RC1005 STRUCTURAL STEEL – HIGH STRENGTH BOLTING BC 1704.3.3
01 – CLASS 1 RC1006 STRUCTURAL COLD-FORMED STEEL BC 1704.3.4
01 – CLASS 1 RC1007 CONCRETE – CAST-IN-PLACE BC 1704.4
01 – CLASS 1 RC1008 CONCRETE – PRECAST BC 1704.4
01 – CLASS 1 RC1012 MASONRY BC 1704.5
01 – CLASS 1 RC1014 WOOD – INSTALLATION OF HIGH-LOAD DIAPHRAGMS BC 1704.6.1
01 – CLASS 1 RC1015 WOOD – INSTALLATION OF METAL-PLATE-CONNECTED TRUSSES BC 1704.6.2
01 – CLASS 1 RC1016 WOOD – INSTALLATION OF PREFABRICATED I-JOISTS BC 1704.6.3
01 – CLASS 1 RC1017 SUBGRADE INSP / SOILS-SITE PREP BC 1704.7.1
01 – CLASS 1 RC1018 SUBSURFACE / SOILS-FILL PLACEMENT IN-PLACE DENSITY BC 1704.7.2 / BC 1704.7.3
01 – CLASS 1 RC1020 DEEP FOUNDATIONS / PILES BC 1704.8
01 – CLASS 1 RC1021 VERTICAL MASONRY FOUNDATION ELEMENTS/PIERS BC 1704.9
01 – CLASS 1 RC1022 UNDERPINNING BC 1704.20.3, BC 1814
01 – CLASS 1 RC1023 WALL PANELS, CURTAIN WALLS, AND VENEERS BC 1704.10
01 – CLASS 1 RC1024 SPRAYED FIRE-RESISTANT MATERIALS BC 1704.11
01 – CLASS 1 RC1025 EXTERIOR INSULATION AND FINISH SYSTEMS (EIFS) BC 1704.13
01 – CLASS 1 RC1026 SMOKE CONTROL SYSTEMS BC 1704.15
01 – CLASS 1 RC1027 MECHANICAL SYSTEMS BC 1704.16
01 – CLASS 1 RC1028 FUEL-OIL STORAGE AND FUEL-OIL PIPING SYSTEMS BC 1704.17
01 – CLASS 1 RC1029 HIGH-PRESSURE STEAM PIPING (WELDING) BC 1704.18
01 – CLASS 1 RC1030 FUEL-GAS PIPING (WELDING) BC 1704.19
01 – CLASS 1 RC1031 STRUCTURAL STABILITY – EXISTING BUILDINGS BC 1704.20.1
01 – CLASS 1 RC1032 MECHANICAL DEMOLITION BC 1704.20.4
01 – CLASS 1 RC1033 EXCAVATION – SHEETING, SHORING, AND BRACING BC 1704.20.2
01 – CLASS 1 RC1034 SOIL PERC. TEST-STORM WATER SYSTEM (DRYWELL) BC 1704.21.1.2
01 – CLASS 1 RC1035 SOIL PERC. TEST-INDIVID ON-SITE PRIVATE SEWAGE DISP.(SEPTIC) BC 1704.22
01 – CLASS 1 RC1036 ON-SITE STORM WATER DRAIN. DISP. /DETENT INSTALL (DRYWELL) BC 1704.21.2
01 – CLASS 1 RC1037 INDIVIDUAL ON-SITE PRIVATE SEWAGE DISP INSTALL (SEPTIC) BC 1704.22
01 – CLASS 1 RC1038 SPRINKLER SYSTEMS BC 1704.23
01 – CLASS 1 RC1039 STANDPIPE SYSTEMS BC 1704.24
01 – CLASS 1 RC1040 HEATING SYSTEMS BC 1704.25
01 – CLASS 1 RC1041 CHIMNEYS BC 1704.26
01 – CLASS 1 RC1042 FIRE-RESISTANT PENETRATIONS AND JOINTS (FIRESTOP) BC 1704.27
01 – CLASS 1 RC1043 ALUMINUM WELDING BC 1704.28
01 – CLASS 1 RC1044 SEISMIC ISOLATION SYSTEMS BC 1707.8
01 – CLASS 1 RC1047 RAISING AND MOVING OF A BUILDING BC 1704.20.5
01 – CLASS 1 RC1048 STRUCTURAL STEEL – DETAILS BC 1704.3.2
01 – CLASS 1 RC1049 HELICAL PILES BC 1704.8.5
01 – CLASS 1 RC1050 MASTIC AND INTUMESCENT FIRE-RESISTANT COATINGS BC 1704.12
01 – CLASS 1 RC1051 HIGH TEMPERATURE HOT WATER PIPING (WELDING) BC 1704.18
01 – CLASS 1 RC1052 POST-INSTALLED ANCHORS BC 1704.32